1. Introduction
   1. System Introduction
      1. Analog vs. Digital Signals
      2. Binary Numbering System
   2. 60 Series Introduction
      1. Basic 60 Series Terminologies and Operation
      2. 60 Series Wheel Slip Control
      3. 60 Series Wiring Diagram Reading
      4. VR15 (Qualification)
      5. PSH (Qualification, Over-current, Over-voltage)
2. Modules And Their Functions
   1. Excitation Control System Modules
      1. CPUE Module (Qualifying with PC and Through the Display)
      2. FBE Module (Qualification of All Excitation Feedbacks)
      3. ADP Module (Identification of ADP Channels and Qualification of the ADP)
      4. FCS Module (Qualification and Troubleshooting of All FCS Functions)
      5. IOE Module
   2. Logic System Modules
      1. CPUL Module (Qualifying with PC and Through the Display)
      2. FBL Module (Qualification of All FBL Feedbacks and Troubleshooting Dynamic Brake)
      3. ADP Module (Identification of ADP Channels)
      4. lOL Modules (Troubleshooting Inputs and Outputs)
   3. Display Control System Modules
      1. CPUD Module
      2. MEM Module (Troubleshooting Common Memory)
      3. ARC Module (Downloading Information Hands-On Exercise)
      4. Common Memory Handout
      5. Verifying Values in Common Memory (Common Memory Interfacing Hands-On Exercise)
3. Display Functions (Exercise 2A)
   1. First Menu
      1. Help
      2. Test Meter/IOL Information
      3. Self Test
      4. Load Test
      5. Unit Number
      6. Fault Reset
   2. Second Menu
      1. Fault
      2. Time and Temp.
      3. Software I.D.
      4. Running Data
      5. Set Time
      6. Turn Off
   3. Downloading Information
      1. Storing Instantaneous Records From The Test Meter
      2. Storing Fault Data
4. Troubleshooting
   1. Troubleshooting Procedures
      1. Troubleshooting the PSH
      2. Loading Problems
   2. Troubleshooting Inputs and Outputs
      1. Utilizing the IOL Information
      2. Utilizing the IOL Data Packs
   3. Troubleshooting On Board the Locomotive
      1. Load Test
      2. Bad CPU Identification
      3. Bad ROM Pack Identification
      4. Troubleshooting the FCS
      5. Troubleshooting the FBE and FBL
      6. No Load, GFC Output Request Missing
      7. No Load, GFC Input Request Missing
5. Summarization
   1. Review of All Materials
   2. Analysis of Classroom Exercises
   3. Final Examination

© 1994 Technical Training Consustants, Inc.
All Rights Reserved, Including Right to Presentation!

Top | Back