1. Introduction
   1. System Introduction
      1. Analog vs. Digital Signals
      2. Binary Numbering System
   2. 70 Series Introduction
      1. Basic 70 Series Terminologies and Operation
      2. 70 Series Wheel Slip Control
      3. 70 Series Wiring Diagram Reading
      4. VR15 (Qualification)
      5. Qualifiing Power Supplies (Boost, Over-current, Over-voltage)
2. Modules And Their Functions
   1. EM 2000 Module
      1. CPU 300 Module
      2. ADA 301 Module (Qualification of Excitation Feedbacks)
         (Identification of AD Channels and Qualification of the ADA)
      3. FCF 300 and FCD 300 Modules
         (Qualification and Troubleshooting of All Functions)
      4. ASC Module
   2. Logic Control Modules
      1. DIO 300
      2. MultiplexIng Confirmation Inputs
      3. TLF 300 (Trainline Filter Protection
   3. Display System
      1. MEM 300 Module (Fault and Operational Data Storage)
      2. Display Panel (Operation of the Key Pad)
3. Display Functions (Exercise 2A)
   1. Main Menu
      1. Data Meters
      2. Self Tests
      3. Unit informatIon
      4. Motor Cut Out
      5. Fault Archive
      6. RunnIng Totals
   2. Downloading Information
      1. Storing Instantaneous Records From The Data Meters
      2. Storing Fault Data
4. Troubleshooting
   1. Troubleshooting Procedures
      1. Troubleshooting the Power Supplies
      2. Loading Problems
   2. Troubleshooting Inputs and Outputs
      1. Utilizing DIO InformatIon on the Display
      2. Replacement of DIO Modules
   3. Troubleshooting On Board the Locomotive
      1. Load Test
      2. Bad CPU Identification
      3. Troubleshooting the FCF and FCD
      4. Troubleshooting the ADA
      5. No Load, GFC Output Request Missing
      6. No Load, GFC Input Request MissIng
5. Summarization
   1. Review of All Materials
   2. Analysis of Classroom Exercises
   3. Final Examination

© 1994 Technical Training Consustants, Inc.
All Rights Reserved, Including Right to Presentation!

Top | Back