Electrical Dash-2 Locomotive Class Syllabus

1. Electrical Introduction
   1. Introduction
      1. Registration
      2. Orientation
   2. Basic Electrical Theory
      1. Current
      2. Voltage
      3. Resistance
      4. Circuit Analysis
   3. Semiconductor Theory
      1. Diodes
      2. Transistors
2. Generators
   1. Companion Alternator
      1. Operation
      2. Excitation
      3. Rectification
   2. Main Generator
      1. Operation
      2. Excitation
      3. Rectification
      4. Diode Qualification
      5. Checking For Grounds
3. Electrical Control
   1. Excitation
      1. Module Functions
      2. Locating The Sensor String
   2. Print Reading
      1. Introduction To Print Reading
      2. Circuit Analysis
   3. Modules And Their Functions
      1. Tracing The Module Functions on The Print
      2. Module Test Points
      3. Troubleshooting The Sensor String
      4. Troubleshooting Feedbacks (Sensor String Regulation)
4. Wheel Slip
   1. Wheel Slip Module
      1. Film, "I.D.A.C"
      2. Tracing Out The Wheel Slip Functions On The Print
      3. Qualitying The WS10 Module
      4. Qualification Of Wheel Slip Transductors
   2. Dynamic Brakes
      1. Operation and Theory
      2. Dynamic Brake Module Qualification
      3. Troubleshooting
   3. Troubleshooting
      1. No Load
      2. Underloading
      3. Overloading
      4. Horsepower Calculation And Qualification
      5. Qualifying Voltage Feedbacks
      6. Qualifying Current Feedbacks
      7. Troubleshooting Contactors, Interlocks, And Relays
5. Question and Answer Session
   1. Review All Materials
   2. Final Exam

© 1994 Technical Training Consustants, Inc.
All Rights Reserved, Including Right to Presentation!

Top | Back